Principle Phys/Measurement Cal Tech - Minneapolis, MN

Started by BamaKid, 07-19-2010 -- 12:34:33

Previous topic - Next topic

BamaKid

***Positions are now filled*****


Medtronic, Inc.   , the world's largest medical device manufacturer has a job opening for a Principle Physical/Measurement Calibration Technician at the Minneapolis, Minnesota location.       

For more detail and to apply on line visit www.   medtronic.   com and look for this job requisition under Career Opportunities:  #74427.    You can send me a private message and attach your resume but ultimately you will need to officially apply at our web site.       

Pay and compensation based on qualifications and experience.      We are targeting someone with PMEL training and at least ten years of experience in the Physical/Measurement discipline.       

For incentive, tell your qualified friends of this opportunity and we will send you a $250 American Express Gift Check if we hire your friend and they mention your name and the PMEL Forum site as where they found out about our job opening.       

Thanks

Metrology Manager

Updated:  Raised the job opening to a Principle level position.


BamaKid

We have another job opening.  I edited my original post to include the new job number.  8-)

BamaKid

Bump.  We still have two cal tech openings. 

BamaKid

Bump.   

We still have two Principle Cal technician positions open here in Minnesota.   

Really, it is not that cold up here folks.  Trust me.  8-)

metrologygeek


Freezer

I'm betting it's warmer than here in ND.   I just got done snowblowing the back yard.    :-D

Can you post any particulars?

BamaKid

Position Description

A high-level non-exempt, technical position providing calibration, troubleshooting, and repair of test and measurement equipment in research, development, and manufacturing environments to FDA and ISO requirements.

Position Responsibilities

* Perform job functions under limited supervision in laboratory, production area, clean room, and test environments.  May require travel to off-site locations up to 60 miles.  May require travel outside of Minnesota up to 10% of time.
* Perform calibrations and measurements traceable to the International System of Units (SI) using appropriate reference standards.  Test and measurement equipment range from general-purpose physical and dimensional equipment to custom built sterilizer systems.  Disciplines comprise: Mass, Temperature, Humidity, Vacuum, Length, Optics, Pressure, Dimensional Metrology, Force, and Flow.
* Create and modify calibration procedures by determining metrology requirements from manufacturer's manuals, laboratory methods, or system requirements.
* Enter calibration results into calibration tracking/documentation computer system.
* Work with equipment users, engineers, and other technicians in the proper operation and selection of test and measurement equipment.
* Troubleshoot and repair test and measurement equipment in support of new projects. 
* Work with data acquisition and validation equipment, i. e.  process control equipment/controllers, chart recorders, DC Analog/Signal Conditioners, and transducers.
* Provide on-site calibration support for equipment that is either too sensitive to move or is too large and not feasible to relocate.
* Work overtime when necessary to support high priority requests or meet project goals. 

Basic Qualifications
Graduate of a two year Technical School/Vocational School program, or equivalent military training (PMEL).
At least 10 years of Metrology or Electronic Calibration experience.
Experience with advanced physical and dimensional calibrations.  Work experience with data acquisition and validation equipment.  Experience with calibration tracking/documentation software systems. 

Desired/Preferred Qualifications
ASQ Certified Calibration Technician rating is a plus.
Strong math and physics background.
Knowledge of Microsoft Office Applications (Word, Excel, Access, and PowerPoint) and Windows OS.
Familiar with these regulations: FDA 21 CFR Part 820 cGMP, ISO 13485, ISO 10012, and ISO 17025.
Working knowledge of Geo-metric Dimensioning and Tolerancing techniques.
Working knowledge of automated calibration software procedures using LabWindows or similar environment.  Possess a valid State Driver's License. 

Physical Job Requirements

PHYSICAL REQUIREMENTS
Lift 50 lbs to a workbench under ideal conditions (NIOSH).

ENVIRONMENTAL EXPOSURES
* Chemical / Solvents
* Clean Room
* Eye Protection
* EtO (Ethylene Oxide)

* Bend/Stoop/Kneel/Lift - 1 hr a day
* Stand/Sit/Walk - 7 hrs a day

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  While performing the duties of this job, the employee is regularly required to stand, sit, walk, talk, hear and reach with hands and arms.  The employee is required to use hands to handle, or feel objects, tools, or components.  Specific vision abilities required by this job include normal vision.


BamaKid

Bump.

We have filled one position, but still have one position open.

The snow is melting, so pack your bags.  8-)