Any Calibration Jobs in NH?

Started by mdkemail, 04-26-2009 -- 06:09:01

Previous topic - Next topic
Print
Go Down Pages1
User actions

mdkemail

04-26-2009 -- 06:09:01
Does anyone know of any calibartion jobs in the NH,ME,MA area?  I have 12 years of experience in RF/microwave areas.   If anyone has any ideas please let me know. 

Thanks

-Mark

USMCPMEL

#1
04-27-2009 -- 12:26:01
No there are no calibration jobs in NH?

Tom

#2
04-27-2009 -- 12:39:27
Yes I know of one e-mail me at tmthomas6@comcast. net

Hawaii596

#3
04-27-2009 -- 17:25:00
YES!  In Andover MA just off I-93 on the MA/NH line.  You can either contact me, of Colleen Maxwell on this site for info.  It is a pretty senior position.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

Mark

#4
04-28-2009 -- 09:09:21
Hawaii596

I would be interested in any information you can send me on the position.   thanks

Hoopty

#5
04-28-2009 -- 10:09:15
#FDJT

msrichmond

#6
07-02-2009 -- 20:00:08
Quote from: mdkemail on 04-26-2009 -- 06:09:01
Does anyone know of any calibartion jobs in the NH,ME,MA area?  I have 12 years of experience in RF/microwave areas.   If anyone has any ideas please let me know. 

Thanks

-Mark

If you're still looking, Otis ANGB is hiring. See www.usajobs.gov for an announcement; gov't job with special pay rate to cover the higher cost of living here.

Any questions, feel free to PM me.

Donaldr1955

#7
07-10-2009 -- 11:06:12
If you are still looking SMR, Inc has opening at the Dover AFB in DE not far from MA.

Send your resume to donaldr1955@aol. com. 
Print
Go Up Pages1
User actions