Need good 4 inch ounce torque wrench any recomendations?

Started by USMCPMEL, 02-25-2009 -- 10:10:36

Previous topic - Next topic
Print
Go Down Pages1
User actions

USMCPMEL

02-25-2009 -- 10:10:36
My customer requires a torque screwdriver set to 4 inch ounces anyone out there have any recomendations?

OlDave

#1
02-25-2009 -- 12:13:32
Take a look at Mountz torque products.
www.etorque.com

Hawaii596

#2
02-25-2009 -- 15:38:49
Another vendor you might also look at is Tohnichi.  They make some low torque products.  They have some Torque Gages that might also be very good if good accuracy is needed.

http://www.tohnichi.com/
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

skolito

#3
02-26-2009 -- 08:03:02
Watters if you need 2% or worse on a torque watch
Print
Go Up Pages1
User actions