Senior Calibration Technician - Medtronic - Minnesota

[BamaKid]

We now have two calibration technician (physical/measurment) positions open in the largest calibration lab in Medtronic, Inc. a Fortune 500 company in the bio-medical industry.

If interested apply on-line for job number 96454 or 102290 at:
www.medtronic.com/careers.

Position Description

A mid-level non-exempt, technical position providing calibration, inspection, and repair of test and measurement equipment in research, development, and manufacturing environments to FDA and ISO requirements.

Position Responsibilities

* Perform job functions under limited supervision in laboratory, production area, clean room, and test environments. May require travel to off-site locations up to 60 miles. May require travel outside of Minnesota up to 10% of time.
* Perform calibrations and measurements traceable to the International System of Units (SI) using appropriate reference standards. Test and measurement equipment range from general-purpose physical and dimensional equipment to custom built sterilizers. Disciplines comprise: Mass, Temperature, Humidity, Vacuum, Length, Optics, Pressure, Dimensional Metrology, Force, and Flow.
* Work with data acquisition and validation equipment, e.g. process control equipment/controllers, chart recorders, DC Analog/Signal Conditioners, and transducers.
* Create and modify calibration procedures by determining metrology requirements from manufacturer's manuals, laboratory methods, or system requirements.
* Enter calibration results into calibration tracking / documentation computer system.
* Work with equipment users, engineers, and other technicians in the proper operation and selection of test and measurement equipment.
* Troubleshoot, inspect, and repair test and measurement equipment in support of new projects.
* Provide on-site calibration support for equipment that is either too sensitive to move or is too large and not feasible to relocate.
* Work overtime when necessary to support high priority requests or meet project goals.

Basic Qualifications

KNOWLEDGE/EDUCATION
Minimum of two years technical school training (60 semester credits) in metrology and mechanical inspection or equivalent military training. ASQ Certified Calibration Technician rating is a plus.

JOB EXPERIENCE
* Minimum 5 years technician experience in metrology/calibration.

SKILLS/COMPETENCIES
Previous experience with principles and practices of metrology/calibration including: physical and dimensional calibrations, calibration tracking, and documentation software systems.

Desired/Preferred Qualifications

Strong math and physics background.
Knowledge of Microsoft Office Applications (Word, Excel, Access, and PowerPoint) and Windows OS.
Familiar with these regulations: FDA 21 CFR Part 820 cGMP, ISO 13485, ISO 10012, and ISO 17025.

Possess a State Driver's License.

Organized, efficient, process oriented; interpersonal/communication skills; self-motivated; team player; strong work ethic; works well under pressure in a dynamic environment; tactful, exercises independent judgment and discretion – professional presentation.

Lift 50 lbs to a workbench under ideal conditions (NIOSH).

ENIRONMENTAL EXPOSURES
* Chemical/Solvents
* Clean Room
* Eye Protection
* Laser
* EtO Exposure

Bend/Stoop/Kneel/Lift - 1 hr a day
* Stand/Sit/Walk - 7 hrs a day

Physical Job Requirements

The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer, and communicate with peers and co-workers.

It is the policy of Medtronic to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Medtronic will provide reasonable accommodations for qualified individuals with disabilities.

[BamaKid]

We still have two calibration positions open, but the job codes to search for on our company web site (www.medtronic.com/careers) are now:  95573 and 98136.

[BamaKid]

We still have two calibration technician positions open:
Job Code 95573 and 96454.

Go to our company web site to apply:  www.medtronic.com/careers

[BamaKid]

We now have one remaining open technician position available in our Fortune 500 bio-medical corporate calibration laboratory located in Minneapolis, Minnesota.

You will find that Medtronic offers a competitive total compenstation package with plenty of job advancement opportunities as Medtronic is a fast-paced growing company.

Go to our company website to review the job description and to apply if interested. Search for job number:  95573.

www.medtronic.com and click on the Careers tab.

Walter

Cal Lab Manager

[BamaKid]

***UPDATE***

We now have two calibration technician positions available in our Fortune 500 bio-medical corporate calibration laboratory located in Minneapolis, Minnesota.

You will find that Medtronic offers a competitive total compenstation package with plenty of job advancement opportunities as Medtronic is a fast-paced growing company.

Go to our company website to review the job description and to apply if interested. Search for job number:  96454 or 102290 (new).

www.medtronic.com and click on the Careers tab.

Walter

Cal Lab Manager

[cpgrules]

sign me up. brrrr.....

[silv3rstr3]

LMAO!!!  Fluke calibrators are only rated down to 0°C for operation.  Might be pushing it's limits up there!!