Aeroflex 3920

Started by dminesinger, 02-16-2011 -- 10:05:18

Previous topic - Next topic
Print
Go Down Pages1
User actions

dminesinger

02-16-2011 -- 10:05:18
I need a service manual, or calibration procedure for an Areoflex 3920, Digital Radio Test Set. I have the operations manual. But, no calibration procedure. Any help out there?
PapaBear

*'It's the Veteran, not the reporter who has given us the freedom of the press.'
'It's the Veteran, not the poet, who has given us the freedom of speech.'
''It's the Military who salutes the flag, who serves beneath the flag, and whose coffin is draped by the flag, who allows the protester to burn the flag.'

Hawaii596

#1
02-17-2011 -- 07:58:18
There is a T.O. in GIDEP.  So if you have GIDEP membership, you should be able to get it.  If not, unfortunately....
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

dminesinger

#2
02-17-2011 -- 08:11:49
Quote from: Hawaii596 on 02-17-2011 -- 07:58:18
There is a T.O. in GIDEP.  So if you have GIDEP membership, you should be able to get it.  If not, unfortunately....

Got it. Thank you.

David
PapaBear

*'It's the Veteran, not the reporter who has given us the freedom of the press.'
'It's the Veteran, not the poet, who has given us the freedom of speech.'
''It's the Military who salutes the flag, who serves beneath the flag, and whose coffin is draped by the flag, who allows the protester to burn the flag.'

Fouad

#3
03-06-2011 -- 02:06:13
coulde you please send me a copy of the service manual, or calibration procedure for an Areoflex 3920?

I don't  have GIDEP membership  :cry:

calibr8tor

#4
03-06-2011 -- 09:28:44
I'm not sure what the sensitivity is on these procedures and manuals, but please be careful what is sent. We do not want sensitive materials getting into the wrong hands. I just had OPSEC training, so maybe I am being overly cautious, but that is my two cents.
Print
Go Up Pages1
User actions