Print Page - TEGAM sensor calibration system

Title: TEGAM sensor calibration system
Post by: Al-Quran on 03-10-2007 -- 14:15:12

hi all,

I am using the TEGAM system to calibrate power sensors. i am having a problem using the 3456A DMM with the system. when connecting the DMM with the system through the IEEE port, it always gives me a syntax error when the PC sends a "REMOVE" command to the DMM.

the DMM is not working with the PC and cannot be connected correctly to the IEEE port.

did anybody use a DMM that worked with the system ? please let me know.

thanks

Title: Re: TEGAM sensor calibration system
Post by: piter_c on 03-14-2007 -- 15:53:27

Hi,
We have Tegam 1805B with F1125 and F1135. Why don't you use 3458A instead of 3456A or just 34401A. I think that 6 1/2 digit is enough.

Title: Re: TEGAM sensor calibration system
Post by: Al-Quran on 03-15-2007 -- 16:17:03

well i have tried the 4358A and its not working yet, ill continue working on it soon, i hope it works.

thanks buddy

PMEL Forum

K Sections => K3/4 - Waveform Analysis & RF Generation => Topic started by: Al-Quran on 03-10-2007 -- 14:15:12