Text only | Text with Images

PMEL Forum

K Sections => K3/4 - Waveform Analysis & RF Generation => Topic started by: briansalomon on 05-06-2016 -- 13:15:43

Title: Parts for HP 911E Sliding Load
Post by: briansalomon on 05-06-2016 -- 13:15:43
I'm looking for a part for an HP 911E sliding load.

I need the small plastic hinge with the spring inside it that locks the airline.

Keysight made this unit obsolete some years back and no longer supports repairs.
Title: Re: Parts for HP 911E Sliding Load
Post by: RFCAL on 05-09-2016 -- 10:11:59
Good Luck!! HP won't sell the parts to repair those.
Title: Re: Parts for HP 911E Sliding Load
Post by: USMCPMEL on 05-11-2016 -- 09:38:17
I can check our spare parts are can you put up a picture of the unit so I know what I am looking for??
Title: Re: Parts for HP 911E Sliding Load
Post by: briansalomon on 05-11-2016 -- 11:06:39
The site only allows a really small file to be attached and there's no way it's going to fit.

I'll pm you with my email.
Title: Re: Parts for HP 911E Sliding Load
Post by: USMCPMEL on 05-11-2016 -- 14:14:12
Sorry I do not see one in our attic.
Title: Re: Parts for HP 911E Sliding Load
Post by: briansalomon on 05-11-2016 -- 14:31:57
Thanks for looking anyway.
Title: Re: Parts for HP 911E Sliding Load
Post by: briansalomon on 05-27-2016 -- 10:16:42
As it turns out, Keysight will still repair this model and (if the right person is asked) does still sell parts although the 911D/E officially became obsolete several years ago.

The part I need, the plastic latch is $330.

http://literature.cdn.keysight.com/litweb/pdf/00911-90019.pdf
Text only | Text with Images