Print Page - Recommendation of cleaning brushes for Dry-well temperaure inserts

Title: Recommendation of cleaning brushes for Dry-well temperaure inserts
Post by: esware on 06-22-2012 -- 15:09:29

Hi all,

We have a Dual block dry-well calibrator from Fluke. Any suggestions on what type of brushes used for cleaning the holes on inserts for both the hot and cold side? Also,where to purchase them?
The outside of the inserts are easily cleaned with emery cloth, just cleaning the holes in the inserts become a challenge.

Thanks,
Pat

Title: Re: Recommendation of cleaning brushes for Dry-well temperaure inserts
Post by: measure on 06-28-2012 -- 07:33:15

Go to a sporting goods store and pick up a gun cleaning kit in a caliber appropriate for the diameter of the hole in the dry block you want to clean. Hart Scientific/Fluke formerly sold a virtually identical item for this purpose but it is no longer available. I think you'll find the gun cleaning kit performs equally as well.

Title: Re: Recommendation of cleaning brushes for Dry-well temperaure inserts
Post by: Old-Navy on 07-02-2012 -- 08:49:34

Bore Snakes work rather well

PMEL Forum

K Sections => K5/6 - Physical Dimensional => Topic started by: esware on 06-22-2012 -- 15:09:29