Text only | Text with Images

PMEL Forum

K Sections => K3/4 - Waveform Analysis & RF Generation => Topic started by: pigchao on 05-06-2012 -- 07:13:12

Poll
Question: Lock level 3 Password for calibration
Option 1: How to locate the Lock level 3 password votes: 0
Option 2: How to unlock the Lock Level votes: 0
Title: Rhode & Schwartz SMIQ02E
Post by: pigchao on 05-06-2012 -- 07:13:12
Hi ! If anyone know the password for Lock Level 3
I need it for calibration of my SMIQ02E Vector Signal Generator
best regards
Title: Re: Rhode & Schwartz SMIQ02E
Post by: dminesinger on 05-07-2012 -- 12:57:46
Send Rohde an at: Info@rsa.rohde-schwarz.com, and explain what you need and why. They are very good about getting you some help. I use them every couple of weeks.
Title: Re: Rhode & Schwartz SMIQ02E
Post by: Hawaii596 on 05-11-2012 -- 10:51:53
For the SMIQ02B (not E - but maybe they are the same) The lock level 1 PW is: 123456, the lock level 2 PW is: 250751.

As these are for B not E, not sure if they are of enay help (or even correct). 
Text only | Text with Images