Hello I have a Fluke 23 that came in and it does not beep on continuity readings. I took it apart and there was a decent amount of corrosion inside the meter. I cleaned the meter out dried it out then cleaned the actual area around the ( no idea what it's called ) beep maker used an erasor to clean the outside rim and the inner white part . Nothing still no beep. Anyone out there know what might have caused this?
Ok so I found a place that still has this part? I want to make sure thats the problem first how do I check the "transducer" as this site calls it?
I'd guess it normally fires off with the application of a little voltage/current. Use some leads to apply some voltage to it, probably whatever voltage the battery is.