Text only | Text with Images

PMEL Forum

K Sections => K3/4 - Waveform Analysis & RF Generation => Topic started by: airbud on 09-10-2009 -- 13:32:25

Title: TA110000-622 (33K4-4-9002-10-CD-1) NOISE SOURCE CALIBRATION SYSTEM
Post by: airbud on 09-10-2009 -- 13:32:25
Is there anyone out there that can use this $h!tty software.  We have tried again and again to make it work but the software just seems to Fail at Reset of 4864 relay reset (*rst) according to NI Spy.   AAAAAAARRRRRRRRRRRRGGGGGGGGGGGGGGHHHHHHHHHHH!!!!!!!!!
Title: Re: TA110000-622 (33K4-4-9002-10-CD-1) NOISE SOURCE CALIBRATION SYSTEM
Post by: Topheth on 09-10-2009 -- 16:30:02
We use this, but I can't recall ever having this error.   If you can provide me with some detailed information, I'll see what I can dig up.   Ours came pre-installed, but we've upgraded since then.   Hopefully I can help get you up and running.
Title: Re: TA110000-622 (33K4-4-9002-10-CD-1) NOISE SOURCE CALIBRATION SYSTEM
Post by: CalLabSolutions on 09-10-2009 -- 21:14:13
What Noise sources are you calibrating?

We recently developed a Noise Source Calibration procedure using the Agilent NFA, and the HP 8510. 

The software is Windows .NET based and also calculates the uncertainties. Currently we are supporting the Agilent 346 Series and the N2000 Series Noise Sources. 
Title: Re: TA110000-622 (33K4-4-9002-10-CD-1) NOISE SOURCE CALIBRATION SYSTEM
Post by: RFCAL on 09-14-2009 -- 14:10:11
We are running Cal Lab Solutions software without any problems.We use an N8975A and a GOLD Noise Source
Text only | Text with Images