Top talent in calibration

[carriec]

Specifically I am working on a position in the Orlando, FL area with a large lab that services the electronics industry.   They need a Lab Supervisor to supervise this commercial calibration and repair location.   This individual will train personnel, review and explain work.     Explains and enforces company rules and regulations.   ·   Appraises performance and recommends changes to pay or status.  ·   Full responsibility for technical task performance.  ·   Responsible for planning, budgeting and staffing projects.  ·   Responsible for the achievement of business objectives ·   Manages laboratory operations to budgeted financial objectives with Profit and Loss responsibility under the direction of the Branch/District Manager or the National Director of Operations ·   Provides direct customer interface in support of quality, customer service, sales and marketing objectives.  ·   Participates in sales and marketing planning activities and helps develop and support national strategies.   ·   May be responsible for quoting processes, service agreements, renewals, demand, while establishing time codes for instruments and reviewing and pricing calibration & repair quotes.   
Requirements are: ·        U. S.  Citizen or U. S.  Permanent Resident status required. ·        College degree preferred or equivalent. ·        PMEL training and certification preferred. ·        A minimum of 4 years experience in the metrology career field. ·        A minimum of 3 years supervisory experience in a commercial metrology laboratory. ·       Expertise in at lease one of the following areas; electronic equipment calibration or physical/dimensional calibration.


I am also working on two Sr.  level Calibration Technician positions in Minnesota with a medical device manufacturer.   They would like to see the PMEL training (no Bachelors degree needed)and a broad scope of calibration experience including electromechanical, mechanical, optical, pneumatic, hydromechanical and pressure type measuring.   These technicians will test, calibrate, adjust and maintain indicating instruments to conform to set standards.

Both of these client companies are stable corporations that offer competitive salary ranges, full benefits and relocation assistance.

If anyone is interested and wants to hear more, please send me an email to carrie@tlgworldwide. com.
Thank you :-)

[Eichampt]

FYI. . . If you want to break through the glass ceiling, you'll need a BS or higher to become than just a bench tech.  We're highly trained already, but it only helps our job outlook to have an education beyond AA/AS.  Most PMEL techs across the country only make between 18-28 per hour.  You'll make ok money as a trained PMEL tech, but w/o the BS or higher, you're really selling yourself short.  I personnally don't know any tech who makes more than 55k per year.  For those in the military, you don't have a good excuse not to take advantage of the 100% TA or GI bill.  GET THAT DEGREE!!!

[CalibratorJ]

Any chance of getting some locations of your job openings? Particularly in the Northern Alabama/Southern Tennessee area?

Sorry- just signed up on these forums and there are a lot of posts to look through to find job locations. . . . . .

[flew-da-coup]

FYI. . . If you want to break through the glass ceiling, you'll need a BS or higher to become than just a bench tech.  We're highly trained already, but it only helps our job outlook to have an education beyond AA/AS.  Most PMEL techs across the country only make between 18-28 per hour.  You'll make ok money as a trained PMEL tech, but w/o the BS or higher, you're really selling yourself short.  I personnally don't know any tech who makes more than 55k per year.  For those in the military, you don't have a good excuse not to take advantage of the 100% TA or GI bill.  GET THAT DEGREE!!!

 Almost every tech I know makes more than $55k a year w/o a BS. I have a Degree in Theology,but it doesn't help me LOL.

[jimmyc]

once you have a BS, why would you stay a bench tech?  i do make more than 55k and love working on the bench.  having been the "man" for a while, it is a nice break.  when i do decide to go back to the dark side, i have no idea what a degree would do for besides "pad" a resume.  if your lab manager is also the business manager, then i guess a degree in that would be useful???

[ZZ]

FYI.  .  .  If you want to break through the glass ceiling, you'll need a BS or higher to become than just a bench tech.   We're highly trained already, but it only helps our job outlook to have an education beyond AA/AS.   Most PMEL techs across the country only make between 18-28 per hour.   You'll make ok money as a trained PMEL tech, but w/o the BS or higher, you're really selling yourself short.   I personnally don't know any tech who makes more than 55k per year.   For those in the military, you don't have a good excuse not to take advantage of the 100% TA or GI bill.   GET THAT DEGREE!!!

 Almost every tech I know makes more than $55k a year w/o a BS.  I have a Degree in Theology,but it doesn't help me LOL. 

It looks like you wasted your time getting that theology degree.  Maybe with a few years at any given company, you'll be at 55k+, but most companies start PMEL techs below 45k.  High cost of living areas don't count.  Garbage collectors sometimes make more than our bretheren.  If you have a RELEVANT degree in a science with management, then you have a lot more promotion potential.  Can't say I want to be a 50-60 year old bench tech.

[flew-da-coup]

FYI.  .  .  If you want to break through the glass ceiling, you'll need a BS or higher to become than just a bench tech.   We're highly trained already, but it only helps our job outlook to have an education beyond AA/AS.   Most PMEL techs across the country only make between 18-28 per hour.   You'll make ok money as a trained PMEL tech, but w/o the BS or higher, you're really selling yourself short.   I personnally don't know any tech who makes more than 55k per year.   For those in the military, you don't have a good excuse not to take advantage of the 100% TA or GI bill.   GET THAT DEGREE!!!

 Almost every tech I know makes more than $55k a year w/o a BS.  I have a Degree in Theology,but it doesn't help me LOL. 

It looks like you wasted your time getting that theology degree.  Maybe with a few years at any given company, you'll be at 55k+, but most companies start PMEL techs below 45k.  High cost of living areas don't count.  Garbage collectors sometimes make more than our bretheren.  If you have a RELEVANT degree in a science with management, then you have a lot more promotion potential.  Can't say I want to be a 50-60 year old bench tech.

 Some may say that I wasted my time on a degree in Theology, but I don't. I didn't get the degree to further my career in Metrology anyway. I have used my Theology degree for 8 years as a part time youth minister for a very large church. I may do it again in the future and I really enjoyed the subject. Also if you noticed the LOL after my post that was used to show a level of facetiousness.

[ZZ]

FYI.   .   .   If you want to break through the glass ceiling, you'll need a BS or higher to become than just a bench tech.    We're highly trained already, but it only helps our job outlook to have an education beyond AA/AS.    Most PMEL techs across the country only make between 18-28 per hour.    You'll make ok money as a trained PMEL tech, but w/o the BS or higher, you're really selling yourself short.    I personnally don't know any tech who makes more than 55k per year.    For those in the military, you don't have a good excuse not to take advantage of the 100% TA or GI bill.    GET THAT DEGREE!!!

 Almost every tech I know makes more than $55k a year w/o a BS.   I have a Degree in Theology,but it doesn't help me LOL.  

It looks like you wasted your time getting that theology degree.   Maybe with a few years at any given company, you'll be at 55k+, but most companies start PMEL techs below 45k.   High cost of living areas don't count.   Garbage collectors sometimes make more than our bretheren.   If you have a RELEVANT degree in a science with management, then you have a lot more promotion potential.   Can't say I want to be a 50-60 year old bench tech. 

 Some may say that I wasted my time on a degree in Theology, but I don't.  I didn't get the degree to further my career in Metrology anyway.  I have used my Theology degree for 8 years as a part time youth minister for a very large church.  I may do it again in the future and I really enjoyed the subject.  Also if you noticed the LOL after my post that was used to show a level of facetiousness.

More power to you coup.  Keep living the dream. . . LOL! (Sarcasm implied)

[hotncold]

I'm a cal tech in a big Pharma company but I have to say I do more than just bench work.   I also do some engineering stuff/backup supervisor/etc.   I have a BASEET degree but always looking for opportunities.   I've been at this company for 16+ years with no military experience.   I've been trained in temperature, dimensional, electrical (DC/LO RF), pressure, optical, humidity, mass, analytical, air flow, etc.   I've worked with reference standards like temperature fixed points, Thunder 9000 generator, spectrophotometers, etc. 

Carrie - Got anything in IL/WI area?  We have 10 Standards Labs techs and about 50 area shop techs.   I average 85K a year with about 10% OT and minimal travel.