Welcome, Guest. Please login or register.
06-03-2020 -- 11:33:16

Login with username, password and session length

Top 10 Posters

flew-da-coup (1303)
Hawaii596 (1015)
USMCPMEL (850)
griff61 (580)
Hoopty (548)
docbyers (544)
MIRCS (535)
CalLabSolutions (518)
PMEL_DEVIL-DOG (509)
Thraxas (498)
Members
Stats
  • Total Posts: 19213
  • Total Topics: 3630
  • Online Today: 61
  • Online Ever: 242
  • (04-19-2014 -- 19:20:34)
Users Online
Users: 1
Guests: 40
Total: 41


Author Topic: Win settings for Zebra Label Printers  (Read 12196 times)

Offline evit

  • Pinger
  • *
  • Posts: 10
  • Action Taken: +0/-0
    • http://www.inuen.com
    • Email
Win settings for Zebra Label Printers
« on: 08-20-2004 -- 23:47:56 »
Hello,
   Anyone know the settings for windows to get the zebra printers formated correctly. I've got the network talking to the printer and can print a test to the label over the network but can not get windows to format the information correctly and place it on the sticker. I am working with AFTO 99 (big yellow) atm. Let me know.
Thanks,
   Brandon
http://www.inuen.com
.In.dependent
..U.nderground
...En.ergy

Offline aNoNyMoUs_SpY

  • Pinger
  • *
  • Posts: 1
  • Action Taken: +0/-0
Win settings for Zebra Label Printers
« Reply #1 on: 08-26-2004 -- 06:40:32 »
Hope this helps...

The AFMETCAL font needs to be installed...Our width and height are set to 3.252 and 1.902 inches...

Offline MikeyB

  • Pinger
  • *
  • Posts: 5
  • Action Taken: +0/-0
Win settings for Zebra Label Printers
« Reply #2 on: 09-09-2004 -- 22:15:26 »
Settings here are set to:

Forms 108s and 99 size set to 3.00/2.00 (width/height) and darkness to 15
Forms 394s and 398s size set to 2.00/1.75 (width/height) and darkness set to 15.

Then it depends also on if you are trying to print directly from PAMS or if you are printing from the CertForm Program.

 When printing from PAMS you have to open internet explore and make sure your printer selected for the internet is set to the AFTO Form printer that you need.  Then in PAMs you would select the label that you are going to use and then save/print from the final screen.

From the program you have to select the Maintenance ---> Enviroment Setup and setup your printer.  Make sure that Certification Form 2002 is highlighted and Certificate.mdb is highlighted and then select the AFTO Form that you would like to set the printer up to. (i.e if you want to set up the printer for AFTO Form 99s then you would click on the Folder/Printer picture with AFTO from 99 next to it)

Thats is how all our setting are set at the moment and everything works good here.

Offline Catfoodm22

  • Pinger
  • *
  • Posts: 3
  • Action Taken: +0/-0
    • Email
Re: Win settings for Zebra Label Printers
« Reply #3 on: 08-19-2005 -- 01:55:37 »
You wouldn't believe that we still have not got our printers to work at all.  Of course we have all the elder statesmen in our lab trying to get them to work however they are too stubborn to ask for help and apparently when they do they ask the wrong questions.  Plus our base area administrators keep deleting our static Ip's--so nice of them.   :mrgreen:Which bases have a comprehensive how to get these things working for us?

 

DISCLAIMER:  This site is not an official US Air Force site, it is intended for private use only.  It is not endorsed, in any way, by the US Air Force, the DoD, or any other governmental agency.  Additionally, all information found within this site is just that, it is NOT meant to be used in place of authorized publications.


All logos and trademarks in this site are property of their respective owner.

All forum content is the property of the respective poster, all the rest 2004-2017 by PMEL Forum.