Welcome, Guest. Please login or register.
12-05-2020 -- 02:13:35

Login with username, password and session length

Top 10 Posters

flew-da-coup (1303)
Hawaii596 (1015)
griff61 (580)
Hoopty (548)
docbyers (544)
MIRCS (535)
CalLabSolutions (523)
Thraxas (498)
  • Total Members: 3470
  • Latest: Arhigos
  • Total Posts: 19257
  • Total Topics: 3655
  • Online Today: 30
  • Online Ever: 242
  • (04-19-2014 -- 19:20:34)
Users Online
Users: 0
Guests: 30
Total: 30

Author Topic: Boeing Calibration Jobs  (Read 7933 times)

Offline 78sc427

  • Pinger
  • *
  • Posts: 9
  • Action Taken: +0/-0
Boeing Calibration Jobs
« on: 03-18-2012 -- 03:07:50 »
Boeing will soon be posting openings for calibration jobs in the Seattle area, if you are interested please go to Boeing's web site and post your resume. The postings should be up soon. Good luck to all that apply.


  • 7-level
  • ****
  • Posts: 857
  • Action Taken: +7/-13
Re: Boeing Calibration Jobs
« Reply #1 on: 03-19-2012 -- 13:40:09 »
Any idea on the payscale?

Offline 78sc427

  • Pinger
  • *
  • Posts: 9
  • Action Taken: +0/-0
Re: Boeing Calibration Jobs
« Reply #2 on: 03-19-2012 -- 18:55:34 »
The payscale can be seen at iam751.org
The jobs are Grade 7 and usually start in the middle of the scale, depending on experiance.
« Last Edit: 03-20-2012 -- 16:37:55 by 78sc427 »

Offline mrrob007

  • 3-level
  • **
  • Posts: 76
  • Action Taken: +1/-1
Re: Boeing Calibration Jobs
« Reply #3 on: 03-19-2012 -- 20:50:21 »
Wow...I see how little they value the cal techs up there.

Offline 78sc427

  • Pinger
  • *
  • Posts: 9
  • Action Taken: +0/-0
Re: Boeing Calibration Jobs
« Reply #4 on: 03-20-2012 -- 18:08:08 »
mrrob007, please post your employers pay scale as a comparison, I'm curious to see the pay differance.

Offline RFCAL

  • 5-level
  • ***
  • Posts: 329
  • Action Taken: +4/-1
    • Email
Re: Boeing Calibration Jobs
« Reply #5 on: 03-20-2012 -- 20:53:01 »
any relo with this?

Offline 78sc427

  • Pinger
  • *
  • Posts: 9
  • Action Taken: +0/-0
Re: Boeing Calibration Jobs
« Reply #6 on: 03-21-2012 -- 01:48:42 »
I'm not sure.

Offline Pez

  • Pinger
  • *
  • Posts: 10
  • Action Taken: +0/-0
Re: Boeing Calibration Jobs
« Reply #7 on: 03-25-2012 -- 03:48:21 »
Have these jobs not posted yet or have they been filled? I don't seen any cal jobs on jobs.boeing.com.

Offline 78sc427

  • Pinger
  • *
  • Posts: 9
  • Action Taken: +0/-0
Re: Boeing Calibration Jobs
« Reply #8 on: 03-25-2012 -- 17:24:16 »
They haven't been posted yet, but they should be posted soon. I was giving people a heads up so they could get a resume posted. The jobs will most likely not be posted until April, they are just finishing interviews now for the last posting.

Offline 78sc427

  • Pinger
  • *
  • Posts: 9
  • Action Taken: +0/-0
Re: Boeing Calibration Jobs
« Reply #9 on: 04-05-2012 -- 04:25:57 »
Here is the listing, good luck to all those that apply.   

Calibration Specialist B

Requisition Number: 12-1001653
Activated -  Posted Internally and Externally. -  Available

Location Everett, WA 
 Renton, WA 
 Seattle, WA 
Virtual Office/Telecommute? Virtual Work Not Available  (Things you should know about Virtual Office)
Business Unit Engineering Ops & Tech
Division Boeing Test & Evaluation
Program Test Support Operations (Tso)
Occupation Title   
Skills Management Title   
Job Classification C2507
Experience Level Entry
Job Type Hourly
Exemption Status Nonexempt
Union Yes
Security Clearance Required?
   (Security Clearance definitions) No Security Clearance Required
Work Eligibility Required? Yes
Is a US Person required to do this job? Yes
Export Control Required? Yes
Relocation Money Available? No (Things you should know about relocation benefits) 
ERP Money Available? No
Date Posted 04/02/2012
Closing Date 04/16/2012  (Things you should know about closing dates)
Position Description
Plan, check, set up, and operate basic Measurement and Test Equipment (M&TE) and/or process  equipment. Use calibration standards to calibrate, adjust, certify, maintain, and repair M&TE/process  equipment using approved calibration procedures, process specifications, equipment drawings, and  M&TE /process equipment manufacturer''s performance specifications. Conduct routine  tests, analyze data and document results. Troubleshoot and recommend resolution of basic laboratory  and test-related problems. Associated Duties and Responsibilities: Route M&TE/process equipment  between receiving area, customer, and calibration lab. Update equipment status using established systems  and complete associated paperwork. Ensure equipment is ready for calibration per metrology processes.  Prioritize and perform work according to automated daily report list, hot list, or as assigned by higher  grade technician. Perform visual check of M&TE/process equipment for discrepancies and wear.  Identify, document, and route non-conforming items in accordance with metrology lab processes. Provide  information and clarification to customers on metrology processes. Work with higher graded employees  engaged in the calibration and certification of M&TE, and assist in the development of new calibration  processes and procedures. Perform computations necessary to analyze measurement test results. DEFINITION  OF TERMS *Basic M&TE and process equipment e.g. Digital meters, probes, scopes, precision hand tools,  process tools, surface plates, levels, optics (basic 2 dimensional), and items used to measure and record:  force, mass, pressure, vacuum, temperature and hardness.   
Basic knowledge of the science of measurement. Work alone/independently. Coordinate daily tasks with others to align priorities for smooth operation of joint workloads. Determine if own work is complete and correct as specified by instructions, drawings and specifications. Effectively communicate verbal information such as tie-ins and job related information. Follow oral/written instructions provided by the lead, team leader, supervisor and/or engineering. Investigate and resolve problems; devise and implement solutions. Knowledge of basic electronics. Knowledge of electrical systems and wiring specifications and requirements to fabricate and/or install components. Knowledge of safe working practices, emergency procedures and possible dangerous situations. Mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per drawings, sketches, and verbal or written instructions. Must have good computing skills Operate computing equipment to input job information (e.g., write tie-ins, reports, rejections, and/or maintain records, logs). Operate computing equipment to work with and review computer aided graphics. Operate various types of test equipment. Troubleshoot electronic test equipment to identify and resolve problems. Understand ladder diagrams, schematics, relay logic and motor control wiring. Use mathematics including practical math, algebra, geometry and trigonometry. Determine if discrepancies exist by obtaining information from multiple sources (e.g., drawings, BAC specifications, shop communication). 
Basic Qualifications For Consideration 

Do you have a minimum of one year calibration laboratory experience? 
Do you have a minimum of one year experience using general purpose test and measuring equipment? 
Do you have experience with Quality Management System requirements? 
Typical Education/Experience
AA degree in Metrology, Electronics or formal Metrology training from US Military preferred; 3 to 5 years  of calibration lab experience preferred.   
Other Job related information
Metrology experience across electrical, dimensional and mechanical physical disciplines preferred
« Last Edit: 04-05-2012 -- 17:48:14 by 78sc427 »


DISCLAIMER:  This site is not an official US Air Force site, it is intended for private use only.  It is not endorsed, in any way, by the US Air Force, the DoD, or any other governmental agency.  Additionally, all information found within this site is just that, it is NOT meant to be used in place of authorized publications.

All logos and trademarks in this site are property of their respective owner.

All forum content is the property of the respective poster, all the rest 2004-2017 by PMEL Forum.