Welcome, Guest. Please login or register.
07-13-2020 -- 08:01:50

Login with username, password and session length

Top 10 Posters

flew-da-coup (1303)
Hawaii596 (1015)
USMCPMEL (850)
griff61 (580)
Hoopty (548)
docbyers (544)
MIRCS (535)
CalLabSolutions (519)
PMEL_DEVIL-DOG (509)
Thraxas (498)
Members
Stats
  • Total Posts: 19226
  • Total Topics: 3637
  • Online Today: 49
  • Online Ever: 242
  • (04-19-2014 -- 19:20:34)
Users Online
Users: 0
Guests: 30
Total: 30


Author Topic: Any Calibration Jobs in NH?  (Read 5054 times)

Offline mdkemail

  • Pinger
  • *
  • Posts: 1
  • Action Taken: +0/-0
    • Email
Any Calibration Jobs in NH?
« on: 04-26-2009 -- 11:09:01 »
Does anyone know of any calibartion jobs in the NH,ME,MA area?  I have 12 years of experience in RF/microwave areas.   If anyone has any ideas please let me know. 

Thanks

-Mark

Offline USMCPMEL

  • 7-level
  • ****
  • Posts: 850
  • Action Taken: +7/-13
Re: Any Calibration Jobs in NH?
« Reply #1 on: 04-27-2009 -- 17:26:01 »
No there are no calibration jobs in NH?

Tom

  • Guest
Re: Any Calibration Jobs in NH?
« Reply #2 on: 04-27-2009 -- 17:39:27 »
Yes I know of one e-mail me at tmthomas6@comcast. net

Offline Hawaii596

  • 9-level
  • *****
  • Posts: 1015
  • Action Taken: +16/-3
Re: Any Calibration Jobs in NH?
« Reply #3 on: 04-27-2009 -- 22:25:00 »
YES!  In Andover MA just off I-93 on the MA/NH line.  You can either contact me, of Colleen Maxwell on this site for info.  It is a pretty senior position.
"I often say that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meagre and unsatisfactory kind."
Lord Kelvin (1824-1907)
from lecture to the Institute of Civil Engineers, 3 May 1883

Mark

  • Guest
Re: Any Calibration Jobs in NH?
« Reply #4 on: 04-28-2009 -- 14:09:21 »
Hawaii596

I would be interested in any information you can send me on the position.   thanks

Offline Hoopty

  • Administrator
  • 7-level
  • *****
  • Posts: 548
  • Action Taken: +24/-1
  • I'm only half geek really...
    • PMEL Forum
    • Email
Re: Any Calibration Jobs in NH?
« Reply #5 on: 04-28-2009 -- 15:09:15 »
There are only 10 types of people in this world.  Those who understand binary, and those who don't.   :wink:

---------
Support PMEL Forum by signing up for a FREE trial.
It won't cost you anything, and it'll help pay the bills around here.

Offline msrichmond

  • 3-level
  • **
  • Posts: 63
  • Action Taken: +0/-0
Re: Any Calibration Jobs in NH?
« Reply #6 on: 07-03-2009 -- 01:00:08 »
Does anyone know of any calibartion jobs in the NH,ME,MA area?  I have 12 years of experience in RF/microwave areas.   If anyone has any ideas please let me know. 

Thanks

-Mark

If you're still looking, Otis ANGB is hiring. See www.usajobs.gov for an announcement; gov't job with special pay rate to cover the higher cost of living here.

Any questions, feel free to PM me.

Offline Donaldr1955

  • 3-level
  • **
  • Posts: 33
  • Action Taken: +0/-0
Re: Any Calibration Jobs in NH?
« Reply #7 on: 07-10-2009 -- 16:06:12 »
If you are still looking SMR, Inc has opening at the Dover AFB in DE not far from MA.

Send your resume to donaldr1955@aol. com. 

 

DISCLAIMER:  This site is not an official US Air Force site, it is intended for private use only.  It is not endorsed, in any way, by the US Air Force, the DoD, or any other governmental agency.  Additionally, all information found within this site is just that, it is NOT meant to be used in place of authorized publications.


All logos and trademarks in this site are property of their respective owner.

All forum content is the property of the respective poster, all the rest 2004-2017 by PMEL Forum.